What is KL finned tube?

KL finned tube refers to a type of heat exchanger tube that has fins attached to its surface. The fins increase the surface area of the tube, which allows for greater heat transfer between the tube and the surrounding fluid. The KL finned tube is named after its inventor, Karl Lueger, and is commonly used in industrial applications where efficient heat transfer is required.

The fins on a KL finned tube are typically made of aluminum or copper and can be attached to the tube using various methods such as welding, soldering, or mechanical bonding. The fins can be formed in different shapes such as helical, rectangular, or oval to optimize heat transfer based on the specific application.

KL finned tubes are commonly used in industries such as oil and gas, petrochemical, and power generation where heat transfer is critical for efficient operation. They are also used in air-cooled heat exchangers, where the fins increase the surface area of the tubes exposed to the air, allowing for efficient cooling of the fluid flowing through the tubes.

KL finned tube typical size:

Base Tube O.D (mm)	Base Tube Thickness (mm)	Fin Height (mm)	Fin Thickness (mm)	Fin Pitch (mm)
15.88 mm ~50.8 mm	1.0 mm ~3.0 mm	6.35 mm ~ 25.4 mm	0.3 mm ~0.5  mm	2.1 mm ~ 6.0 mm
Base Tube Material		Fin Material		Tube Length (Mtr)
Carbon Steel ,Alloy Steel ,Stainless Steel, Copper Alloy		Aluminum, Copper		≤ 18Mtrs

Some additional details about KL finned tubes:

The fins on KL finned tubes are often referred to as "integral" fins because they are created by deforming the metal of the tube itself, rather than being a separate piece attached to the tube.

KL finned tubes can be made using a variety of tube materials such as carbon steel, stainless steel, and copper alloys, depending on the application.

The heat transfer performance of KL finned tubes can be affected by factors such as the shape and size of the fins, the spacing between the fins, and the fluid flow rate and temperature.

KL finned tubes can be designed for both liquid-to-liquid and gas-to-liquid heat transfer applications.

In addition to increasing heat transfer efficiency, KL finned tubes can also help to reduce the size and weight of heat exchangers, making them more compact and easier to transport and install.

KL finned tubes are often used in combination with other types of heat transfer surfaces such as plain tubes or extended surfaces (such as dimpled or corrugated tubes) to create more complex heat exchanger configurations that can further optimize heat transfer performance.

How about KL fin tube heat transfer proformance?

KL finned tubes are designed to increase the heat transfer performance of a heat exchanger by increasing the surface area available for heat transfer. The fins on the tube surface increase the surface area by several times compared to a plain tube, which results in a higher heat transfer coefficient.

The heat transfer performance of KL finned tubes depends on several factors such as the material and geometry of the fins, the tube material, the fluid properties, and the flow conditions. The heat transfer performance can be quantified by the heat transfer coefficient, which is a measure of the rate of heat transfer per unit area of the heat transfer surface.

In general, KL finned tubes can achieve higher heat transfer coefficients compared to plain tubes, especially when the fluid on the outside of the tube is a gas. This is because the fins increase the heat transfer area and provide additional turbulence to the fluid, which enhances the convective heat transfer.

However, the heat transfer performance of KL finned tubes can also be affected by factors such as fouling (deposits on the heat transfer surface), corrosion, and mechanical damage. These factors can reduce the effective surface area of the fins and decrease the overall heat transfer performance of the tube.

Therefore, the design and operation of a heat exchanger using KL finned tubes must consider these factors to ensure optimal heat transfer performance and reliability over the life of the equipment.

In order to forward you a promt offer KL Finned Tube, we would be pleased to receive you detailed enquiry including:

• Base tube material 

• Base tube size (OD x WT x Length)

• Fin material

• Fin type

• Fin diameter or height

• Fin thickness

• Fins per inch, meter or fin pitch

• Lenght of plain, unfinned ends

• Finned Tube Quantity

(Additional fabrication, such as bend or weld the tubes into tubeplate or assembly)

KL finned tube|Knurled L Fin Tube