Finned tube|Square Finned Tube|Extruded Finned Tube|HFW Serrated Fin Tube|Lord Finned Tube-T.S. Industrial Corporation Limited
·Home   ·Contact Us
HOME ABOUT US FINNED TUBES CAREER NEWS CENTER CONTACT US

PHONE:0086-21-66030009
FAX:0086-21-66030005
E-Mail:sales@lordfintube.com
ADD:Shanghai International Metal Central, Baoshan,Shanghai, The P. R. of China. Post. 201900

Location : Home > News Center > Lord Fin Tube--Brass heat exchanger
Lord Fin Tube--Brass heat exchanger

Brass heat exchanger


1. Introduction
5mm copper tube heat exchanger technology is based on the use of small diameter (diameter ≤5mm) internal thread copper tube heat exchanger an energy-efficient technology, its core is the use of a small copper tube aluminum fins in the traditional heat exchangers high thread diameter brass to replace the original large diameter brass, and the fins and the flow path is optimized to improve the efficiency of heat exchangers.
A 5mm high thread copper tube heat exchanger technology with respect to the same performance 7mm copper tube heat exchanger, can reduce costs by about 20%, and can reduce about 30% of the amount of refrigerant charge.
2, commonly used production process is as follows:
 
Casting → rolling → United pull plate Pull → level winding → → annealing → internal thread forming → level winding → annealing → package delivery 

Copyright © 2015 T.S. Industrial Corporation Limited
Keywords:Finned Tube Finned Tube