|
|
|
|
■ Location : Home > NEWS > Lord Fin Tube--Tube for Heat Exchanger 600Pcs |
|
|
|
Lord Fin Tube--Tube for Heat Exchanger 600Pcs |
ASTM A179/ASME SA179 Tube for Heat Exchanger
MAT : A179,Q 19.05 BWG 014 6100 Long
FULLSPECIFICATION:
ASTM A179/ASME SA179
No. OF Lenghts: 600
OD(MM) : 19.05
WT(MM): 2.110
WALL: Minium
Lengths: 6100
DRY/OILED: OILED
QTY: 600 PCS
The heat exchanger tube is one of the components of the heat exchanger, which is placed in the cylinder for the exchange of heat between the two media. It has high thermal conductivity and good isotherm. It is a device that can transfer heat from one point to another quickly, and has almost no heat loss. So it is called a heat transfer superconductor. Its thermal conductivity is thousands of times that of copper.
In addition to smooth tubes, heat exchangers can also use a variety of enhanced heat transfer tubes, such as finned tubes, threaded tubes, spirally grooved tubes, etc. The fins of finned tube should be arranged on the side of low heat transfer coefficient when the difference of heat transfer coefficient between the two sides of tube diameter is large.
|
|