Finned Tube Manufacturer|Extruded Finned Tube|Embedded G Finned Tube|Tube Sheet
·Home   ·Contact Us
HOME ABOUT US FINNED TUBES CAREER NEWS CENTER CONTACT US

PHONE:0086-21-66030009
FAX:0086-21-66030005
E-Mail:sales(@)lordfintube.com
ADD:No.2, Lane1588 Youyi Road, Baoshan,Shanghai, The P. R. of China. Post. 201999

Location : Home > NEWS > Longitudinal Fin Type Fin Tube 24PCs
Longitudinal Fin Type Fin Tube 24PCs

Longitudinal Finned Tubes

Longitudinal fin type fin tubes are heat transfer components that are commonly used in various industrial applications, such as boilers, heat exchangers, and air coolers. These fin tubes consist of a base tube with longitudinal fins attached to the outer surface of the tube.

Longitudinal fin type fin tubes are widely used in the heat transfer industry due to their efficient heat transfer capabilities. These tubes consist of longitudinal fins that are attached to the outside surface of a base tube. The fins increase the surface area of the tube and provide a greater surface for heat transfer, making them ideal for use in applications where high heat transfer rates are required.

The longitudinal fins are thin, elongated strips of metal that are attached to the base tube using various methods, such as welding, brazing, or rolling. The fins increase the surface area of the tube, which enhances the heat transfer efficiency by improving the convection heat transfer coefficient.

The longitudinal fins on these tubes can be either solid or perforated, depending on the application. Solid fins are used in applications where the fluid being transferred has a low viscosity and is not likely to cause fouling. Serrated fins, on the other hand, are used in applications where the fluid being transferred has a high viscosity and is likely to cause fouling.

ASME SA179 Longitudinal Finned Tubes

Base Tube Material

Fin Material

Tube Length (mm)

Fin length  (mm)

Fin Tube Quantity (Pc)

ASME SA179

Carbon Steel

4023

3524

24

Base Tube O.D (mm)

Base Tube Thickness  (mm)

Fin Height (mm)

Fin Thickness  (mm)

Fin Pitch  (mm)

25.4

2.77

12.7

0.89

12U

ASME SA179 is standard Specification for Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

Longitudinal fin type fin tubes can be manufactured using a variety of materials, including carbon steel, stainless steel, copper, and aluminum. The choice of material will depend on the specific application and the requirements for corrosion resistance, strength, and thermal conductivity.

 

These tubes are commonly used in heat exchangers, air coolers, and boilers, as well as in a variety of other industrial applications. They offer a number of advantages over other types of fin tubes, including increased heat transfer rates, improved thermal efficiency, and reduced fouling.

 

In conclusion, longitudinal fin type fin tubes are an important component in many industrial heat transfer applications. Their efficient heat transfer capabilities make them ideal for use in a variety of settings, and their versatility allows them to be used with a range of different materials and in different configurations. If you are looking for a reliable and efficient way to transfer heat in your industrial processes, longitudinal fin type fin tubes may be the perfect solution.

Longitudinal Finned Tubes

Longitudinal Finned Tubes

Copyright © 2015 T.S. Industrial Corporation Limited
Keywords:Finned Tube Finned Tube