Finned tube|Square Finned Tube|Extruded Finned Tube|HFW Serrated Fin Tube|Lord Finned Tube-T.S. Industrial Corporation Limited
·Home   ·Contact Us
HOME ABOUT US FINNED TUBES CAREER NEWS CENTER CONTACT US

PHONE:0086-21-66030009
FAX:0086-21-66030005
E-Mail:sales@lordfintube.com
ADD:Shanghai International Metal Central, Baoshan,Shanghai, The P. R. of China. Post. 201900

Location : Home > News Center > Lord Fin Tube--How to determine the height of the fin tube heat?
Lord Fin Tube--How to determine the height of the fin tube heat?

fin tube heat

How to determine the height of the fin tube heat?
 
How to determine the height of the fin tube heat? How much is the amount of heat of the fin tube is a virtual quantity, it is not to look at, if not after measurement, calculation or installation position is not appropriate, it is easy to affect the heating. So we can take some measures, such as increasing the number of fin tube, because the unit time flow through the radiator of the water flow is constant, then on the outer wall of the radiator with fin tube auxiliary, you can achieve the effect of improving the heat dissipation.
 
Now the heat sink material, there is a certain thermal resistance, which is inversely proportional to the heat dissipation, that is, the higher the thermal resistance, the lower the heat dissipation. So want to improve the heat dissipation of the heat sink, but also from this aspect, it should be significantly improved.
 
In addition, because the radiator is mainly radiation cooling and convection heat, so if the air circulation is not smooth, the heat will be distributed more slowly. For such problems, by improving the air circulation in the house is also a very good method. For example, the radiator can be installed near the window, the main cold air can be directly heated, to achieve the desired effect.
 
 

 

Copyright © 2015 T.S. Industrial Corporation Limited
Keywords:Finned Tube Finned Tube