Finned Tube Manufacturer|Extruded Finned Tube|Embedded G Finned Tube|Tube Sheet
·Home   ·Contact Us
HOME ABOUT US FINNED TUBES CAREER NEWS CENTER CONTACT US

PHONE:0086-21-66030009
FAX:0086-21-66030005
E-Mail:sales(@)lordfintube.com
ADD:No.2, Lane1588 Youyi Road, Baoshan,Shanghai, The P. R. of China. Post. 201999

Location : Home > NEWS > Lord Fin Tube--Laser welded stainless steel tube
Lord Fin Tube--Laser welded stainless steel tube

Laser welded stainless steel tube

Considering the low electrical efficiency of high-frequency welding, high working voltage, poor safety, low single-machine power, and prominent groove corrosion, Laser welded stainless steel tube is selected laser as a new welding method, which can reduce energy consumption to a lower level. At the same time, the heat-affected zone is small, and the deformation caused by heat conduction is also low;

Laser welded stainless steel tube overcome the problems of groove corrosion and internal burr formation on the inner wall of coiled tubing manufactured by ERW or TIG;

Steel tube material

304316L22052507825625

Steel tube O.D.

1/16"—1"

Steel tube wall thickness

0.5MM—3MM

Steel tube length

100-12000M

Working pressure

50—200MPA

Laser welding is suitable for coiled tubing, corrosion-resistant coiled tubing, a coil of coiled tubing is several kilometers long. It can replace conventional tubing for many operations. The coiled tubing operation equipment has the characteristics of pressure operation and continuous lifting. The equipment is small in size, fast in operation cycle and low in cost.

Laser welded Stainless Tube

Laser welded stainless steel tube

Copyright © 2015 T.S. Industrial Corporation Limited
Keywords:Finned Tube Finned Tube