Finned tube|Square Finned Tube|Extruded Finned Tube|HFW Serrated Fin Tube|Lord Finned Tube-T.S. Industrial Corporation Limited
·Home   ·Contact Us
HOME ABOUT US FINNED TUBES CAREER NEWS CENTER CONTACT US

PHONE:0086-21-66030009
FAX:0086-21-66030005
E-Mail:sales@lordfintube.com
ADD:Shanghai International Metal Central, Baoshan,Shanghai, The P. R. of China. Post. 201900

Location : Home > News Center > Lord Fin Tube--Sterile Heat Exchanger
Lord Fin Tube--Sterile Heat Exchanger

Sterile Heat Exchanger

Sterile Heat Exchanger

In pharmaceutical production procedures, many must be executed in clean, sterile conditions. In order to meet these conditions, We makes sterile grade heat exchange devices.

   We manufactures types of Φ 6 x 1 mm, Φ 8 x 1 mm, Φ 12 x 1 mm double tube plate, single tube plate, single process, mutiple process, annular flow type and sterile spiral wound tube heat exchanger. At the same time can provide personalized products according to customers special demand.
   Flow Sterile grade heat exchanger features a double tubed plate design, it successfully prevents cross contaminations. Tube Sheets and Tube plates are made with German hydraulic expanding joint technology, the double groove seal completely prevents leakage, the material used is 316 L stainless steel and the roughness Ra of the inner tube’s surface is less than 0.5 μm, with the full drain design and no dead corners, it is completely in conformity with the GMP and FDA’s regulations, and can meet the strict demands of cleanliness for process conditions of blood plasma, vaccines, injections and WFI etc.

Application process: clean steam, high purity steam or water injection system with the sampling system Product Description: Design structure for the mobile spiral condenser, using all 316L sterile grade stainless steel. Mainly used in pure steam or injection water sampling point. The cooling water is connected with the field pipeline through quick connection, safe and quick. Treatment range: pure steam <200ml / min (condensed water); water for injection <50ml / min.

Application of the process: water for injection, purified water cooling, liquid system with water cooling Product Description: The overall use of 316L sterile grade stainless steel, material contact side surface roughness value of <0.4μm, heat pipe with φ6 diameter; shell with U Tube structure, high heat transfer efficiency. Especially for smaller flow, large temperature difference conditions. Processing capacity range: 0.25t / h ~ 1.5t / h

Application technology: water injection system for water injection, water injection sampling points and high clean liquid temperature control Product Description: Combined with the traditional coil casing heat exchanger structural characteristics, the use of all 316L sterile stainless steel, material contact side of the surface Roughness value <0.4 μm. Unique compact structure to prevent thermal fatigue, increase heat transfer efficiency and reduce the size. Especially for high temperature and high pressure and low flow rate of application conditions. Processing capacity range: <0.25t / h

Annular flow channel sterile heat exchanger, shell side of the import and export of fluid distribution, fluid resistance is small, so that the system pressure loss greatly reduced, reducing the power load, saving operating costs.

Links to Lord Fin Tube:

 

Copyright © 2015 T.S. Industrial Corporation Limited
Keywords:Finned Tube Finned Tube