Finned tube|Square Finned Tube|Extruded Finned Tube|HFW Serrated Fin Tube|Lord Finned Tube-T.S. Industrial Corporation Limited
·Home   ·Contact Us
HOME ABOUT US FINNED TUBES CAREER NEWS CENTER CONTACT US

PHONE:0086-21-66030009
FAX:0086-21-66030005
E-Mail:sales@lordfintube.com
ADD:Shanghai International Metal Central, Baoshan,Shanghai, The P. R. of China. Post. 201900

Location : Home > News Center > Lord Fin Tube--Comparison the integral fin tube and HFW fin tube
Lord Fin Tube--Comparison the integral fin tube and HFW fin tube
Comparison of the advantages and disadvantages of the integral fin tube and high frequency welded fin tube

Integral fin tubes and high frequency welded fin tubes are commonly used in the current market, but the two kinds of products are not the same, mainly due to some of the characteristics of the product itself. Or will the overall fin tube and high frequency welded fin tube contrast, see their respective advantages and disadvantages in where?

First to talk about the high frequency welded fin tube, due to the production process and other restrictions, so that the fin spacing of the fin tube is relatively large, so the ratio is low. That is to say, the same basal area of the heat transfer effect is relatively limited. And the fin material is usually steel or stainless steel sheet, also can make the heat transfer efficiency is affected.

It can be seen that the high-frequency welded fin tube is not suitable for use in the air cooler, but the overall fin tube is not the same, not only for the heat effect has been significantly expanded, the performance of the fin has been further enhanced, can be more durable. In addition, the overall fin tube is not easy to accumulate dust, resulting in a series of adverse consequences can be effectively avoided. 

Copyright © 2015 T.S. Industrial Corporation Limited
Keywords:Finned Tube Finned Tube