ASTM A234 WP9 Return Bend|ASTM A335 P9 Fin Tube

ASTM A335 P9 is standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service. 

Return bend 6 inch NPS X SCH STD WT. X 180˚ SR. seamless construction Material according to ASTM A234 Gr WP9. FOR H-01 CDU 1 & CDU 2135NOS

Return bend 8 inch NPS X SCH STD WT. X 180˚ SR. Seamless construction Material according to ASTM A234 Gr WP9. FOR H-01 CDU 152NOS

Elbow 6 inch NPS X SCH STD WT. X 90˚ SR. Seamless construction Material according to ASTM A234 Gr WP9. FOR H-01 CDU 1 & CDU 235NOS

Return bend 6 inch NPS X SCH (40) WT. X 180˚ SR. Seamless construction Material according to ASTM A234 Gr WP22. FOR H-01 CDU 1 & CDU 210NOS

Flange 6 inch NPS X 300# X WN. RF X SCH 40 bore. Material according to ASTM A182 Gr F9 FOR H-01 CDU 1 & CDU 224NOS

Bare pipe 8 inch NPS (8.625-inch O.D) X SCH 40 (8.18 mm) min wall thickness X 40 FT (12192 mm) long. Hot finished seamless alloy steel material according to ASTM A335 Gr P9.FOR H-01 CDU 160NOS

Bare pipe 8 inch NPS (8.625-inch O.D) X SCH 40 (8.18 mm) min wall thickness X 24 FT (7315.2 mm) long. Hot finished seamless alloy steel material according to ASTM A335 Gr P9. FOR H-01 CDU 160NOS

Bare pipe 6 inch NPS (6.625-inch O.D) X SCH 40 (7.11 mm) min wall thickness X 40 FT (12192 mm) long. Hot finished seamless alloy steel material according to ASTMA335 Gr P9. FOR H-01 CDU 1 & CDU 2126NOS

Bare pipe 6 inch NPS (6.625-inch O.D) X SCH 40 (7.11 mm) min wall thickness X 24 FT (7315.2 mm) long. Hot finished seamless alloy steel material according to ASTM A335 Gr P9. FOR H-01 CDU 1 & CDU 2131NOS

Fin tube 6 inch NPS (6.625-inch O.D) X SCH 40 (7.11 mm) min wall thickness X 24 FT (7315.2 mm) long. Pipe material: alloy steel according to ASTM A335 Gr P9. (Hot finished seamless) Fin material: 11 Cr. Fin length (7112 mm) Un finned length: (101.6 mm) for each side. Fin thickness :( 2.7 mm) minimum. Fin high: (19.05 mm) maximum. Fin per meter : ( 118/m ) Fin type: solid fin tube FOR H-01 CDU 268NOS"

Fin tube 6 inch NPS (6.625 inch O.D) X SCH 40 (7.11 mm) min wall thickness X 40 FT (12192 mm) long. Pipe material: alloy steel according to ASTM A335 Gr P22. (Hot finished seamless) Fin material: 11 Cr Fin length (11988.8 mm) Un finned length: (101.6 mm) for each side. Fin thickness :( 2.7 mm) minimum. Fin high: (19.05 mm) maximum. Fin per meter : ( 118/m ) Fin type: solid fin tube FOR H-01 CDU 168NOS

Fin tube 6 inch NPS (6.625-inch O.D) X SCH 40 (7.11 mm) min wall thickness X 24 FT (7315.2 mm) long. Pipe material: alloy steel according to ASTM A335 Gr P22. (Hot finished seamless) Fin material: 11 Cr Fin length (7112 mm) Un finned length: (101.6 mm) for each side. Fin thickness :(2.7 mm) minimum. Fin high: (19.05 mm) maximum. Fin per meter : ( 118/m ) Fin type: solid fin tube     FOR H-01 CDU 112NOS

Fin tube 6 inch NPS (6.625-inch O.D) X SCH 40 (7.11 mm) min wall thickness X 40 FT (12192 mm) long. Pipe material: alloy steel according to ASTM A335 Gr P22. (Hot finished seamless) Fin material: C.S Fin length (11988.8 mm) Un finned length: (101.6 mm) for each side. Fin thickness:( 2.7 mm) minimum. Fin high: (19.05 mm) maximum. Fin per meter : ( 118/m ) Fin type: solid fin tube  FOR H-01 CDU 212NOS

Fin tube 6 inch NPS (6.625-inch O.D) X SCH 40 (7.11 mm) min wall thickness X 40 FT (12192 mm) long. Pipe material: alloy steel according to ASTM A335 Gr P22. (Hot finished seamless) Fin material: 11 Cr Fin length (11988.8 mm) Un finned length: (101.6 mm) for each side. Fin thickness :( 2.7 mm) minimum. Fin high: (19.05 mm) maximum. Fin per meter : ( 118/m ) Fin type: solid fin tube FOR H-01 CDU 16NOS

Fin tube 6 inch NPS (6.625-inch O.D) X SCH 40 (7.11 mm) min wall thickness X 24 FT (7315.2 mm) long. Pipe material: alloy steel according to ASTM A335 Gr P22. (Hot finished seamless) Fin material: 11 Cr Fin length (7112 mm) Un finned length: (101.6 mm) for each side. Fin thickness :(2.7 mm) minimum. Fin high: (19.05 mm) maximum. Fin per meter : ( 118/m ) Fin type: solid fin tube FOR H-01 CDU 16NOS

Fin tube 6 inch NPS (6.625 inch O.D) X SCH 40 (7.11 mm) min wall thickness X 40 FT (12192 mm) long. Pipe material: alloy steel according to ASTM A335 Gr P22. (Hot finished seamless), Fin material: C.S Fin length (11988.8 mm) Un finned length: (101.6 mm) for each side. Fin thickness:( 2.7 mm) minimum. Fin high: (19.05 mm) maximum. Fin per meter : ( 118/m ) Fin type: solid fin tube FOR H-01 CDU 28NOS

Fin tube 6 inch NPS (6.625 inch O.D) X SCH 40 (7.11 mm) min wall thickness X 24 FT (7315.2 mm) long. Pipe material: alloy steel according to ASTM A335 Gr P22. (Hot finished seamless) Fin material: C.S Fin length (7112 mm) Un finned length: (101.6 mm) for each side. Fin thickness :(2.7 mm) minimum. Fin high: (19.05 mm) maximum. Fin per meter : ( 118/m ) Fin type: solid fin tube FOR H-01 CDU 28NOS

Elbow 6 inch NPS X SCH STD WT. X 45˚ LR. Seamless construction Material according to ASTM A234 Gr WP22. FOR H-01 CDU 4NOS

Elbow 6 inch NPS X SCH (40) WT. X 45˚ LR. Seamless construction Material according to ASTM A234 Gr WP22. FOR H-01 CDU 24NOS

Fin tube 101.6 mm O.D X 6.4 mm minimum wall thickness X 3500 mm length. Tube material: ASTM A-213 Gr T9 (hot finished) Fin material:C.S Fin length (2450 mm) Un finned length: (50 mm) at one side tube and (1000 mm) at other side tube. Fin thickness:( 1.2 mm) Fin high: (16 mm) Fin per inch: (4/1"") Fin type: U-CUT FIN See detail (1 ). FOR F-20130NOS

Fin tube 101.6 mm O.D X 5.2 mm minimum wall thickness X 3500 mm length. Tube material: ASTM A213 Gr TP 321H (hot finished) Fin material: C.S Fin length (2450 mm) Un finned length: (50mm) at one side tube and (1000mm) at other side tube. Fin thickness:( 1.2mm) Fin high: (16mm) Fin per inch: (5/1") Fin type: U-CUT FIN See detail (2). FOR F-50122NOS

Bare tube 101.6 mm O.D X 6.4 mm min wall thickness X 40FT (12192 mm) length. Hot finished seamless tubes material according to ASTM A213 Gr T9. FOR F-20130NOS

Bare tube 73 mm O.D X 4.8mm min wall thickness X 9000 mm length. Hot finished seamless tubes material according to ASTM A213 Gr T9. FOR F-201,F-501&(O2-H1)25NOS

Bare tube 101.6 mm O.D X 5.2mm min wall thickness X 40FT (12192mm) length. Hot finished seamless tubes material according to ASTM A- 213 Gr TP 321H FOR F-50120NOS

Bare tube 48.3 mm O.D × 4.8mm min wall thickness X 40FT (12192mm) length. Hot finished seamless tubes, material according to ASTM A- 213 Gr TP 321H For F-501 & F-601.20NOS

Eccentric reducer 101.6×114.3 mm O.D X SCH 80. Seamless construction Material according to ASTM A234 Gr WP9. FOR F-20120NOS

Return bend 101.6 mm O.D X SCH 80 X 180˚ LR. seamless construction Material according to ASTM A234 Gr WP9. FOR F-20120NOS

Return bend 73 mm O.D X SCH 80 X 180˚ SR. seamless construction Material according to ASTM A234 Gr WP9. FOR F-20115NOS

Return bend 101.6 mm O.D X SCH 80 X 180˚ SR. CLASS S Material according to ASTM A-403 Gr WP321H. FOR F-50155NOS

Return bend 73 mm O.D X SCH 80 X 180˚ LR. seamless construction Material according to ASTM A234 Gr WP9. FOR F-50110NOS

Return bend 48.3 mm O.D X SCH 160 X 180˚ LR. CLASS S Material according to ASTM A-403 Gr WP321H. FOR F-60132NOS

Elbow 101.6 mm O.D X SCH 80 X 90˚ SR bend seamless construction Material according to ASTM A234 Gr WP9. FOR F-20110NOS

Elbow 101.6 mm O.D X SCH 80 X 90˚ SR bend CLASS S Material according to ASTM A-403 Gr WP321H. FOR F-50115NOS

Elbow 48.3 mm O.D X SCH 160 X 90˚ LR bend CLASS S Material according to ASTM A-403 Gr WP321H. FOR F-606NOS

Eccentric reducer 101.6×114.3 mm O.D X SCH 80. seamless construction Material according to ASTM A234 Gr WP9. FOR F-2014NOS

Eccentric reducer 73×88.9 mm O.D X SCH 80. seamless construction Material according to ASTM A234 Gr WP9. FOR F-201 & F-5018NOS

Concentric reducer 2 inch × 1 inch NPS X SCH 80. seamless construction Material according to ASTM A234 Gr WP9 FOR F-2011NOS

Concentric reducer 101.6 × 48.3 mm O.D XSCH 160. CLASS S Material according to ASTM A-403 Gr WP321H. FOR F-5012NOS

TEE 3½ inch × 3½ inch × 2 inch NPS * SCH 80 seamless construction Material according to ASTM A234 Gr WP9. FOR F-2011NOS

TEE 101.6 mm O.D * SCH 80 CLASS S Material according to ASTM A-403 Gr WP321H. FOR F-5012NOS

TEE 48.3 mm O.D * SCH 160 CLASS S Material according to ASTM A-403 Gr WP321H. FOR F-6012NOS

Flange 3½ inch NPS X 300# X WN.RF X SCH 80.Material according to ASTM A182 Gr F9 FOR F-20110NOS

Flange 3½ inch NPS X 300# X SO.RF. Material according to ASTM A182 Gr F9 FOR F-2014NOS

Flange 3 inch NPS X 150# X WN. RF X SCH 80. Material according to ASTM A182 Gr F9, FOR F-201&F-5018NOS

Flange 4 inch NPS X 300# X WN. RF X SCH 80. Material according to ASTM A182 Gr F9 FOR F-2014NOS

Flange 1 inch NPS X 300# X WN. RF X SCH 80. Material according to ASTM A182 Gr F9 FOR F-2012NOS

TECHNICAL REQUIREMENTS:

1.Tubes end at one side should be prepared for rolling and the other side should be prepared for welding.

2. Each item should be covered by plastic caps.

3. Each item should be packed in wooden boxes separately with weatherproof lining durable and suitable for overseas shipment and handling.

4. The origin country should be one of the following: Japan, USA, Czech Republic, Finland, France, Germany, Greece, Hungary, Italy, Netherland, Austria, Poland and United Kingdom

5.Origin certificate should be submitted which must be stamped by Iraqi embassy in the origin country.

6.The delivered material without inspection authorities issues, relevant reports, mill and origin certificates shall be unacceptable.

7.The third party inspection activities should be issued in a separate inspection certificate according to (EN 10204 type 3.2), which confirm that all materials and products are in compliance with the requirements of the order and in which test results are supplied.

8.  Inspection: All the destructive and the non-destructive tests with supplementary requirements should be applied (on the raw & supplied material) according to the required ASTM specification and its related standards for each item.

- The mill testing should include the following activities: • Chemical analysis • Mechanical & hardness tests. • Visual inspection • Dimensions check. • Hydrostatic Test or its alternative (non-destructive electric test) that performed for the full body of each tube & pipe. • Ultrasonic

Examination for items manufactured according to A-234 & A-403 specifications should be applied. - The mill testing results mentioned above should be provided in fully detailed certificates.

- The mill certificates should be reviewed and approved by one of the following third party inspection companies: • TÜV Rheinland international • Intertek  ATG • SGS • BureaVeritas • Rina AL-Rookal - The task of third party inspection should include inspection at least 10%.

ASTM A335 P9 Fin tube