25Nov2020
ASTM B338 Titanium Alloy Tubes
ASTM B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers.
read more
19Nov2020
ASTM A179/A179M Heat Exchanger Tubes
ASTM A179/A179M standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
read more
4Nov2020
ASTM B163 Seamless Nickel Alloy Condenser and Heat- Exchanger Tubes
Standard ASTM B163 Specification for Seamless Nickel and Nickel Alloy Condenser and Heat Exchanger Tubes
read more
28Oct2020
Standard ASTM A498 Heat-Exchanger Tubes with Integral Fins
ASTM A498 Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins, covers external helical, integral finned, seamless or welded low-carbon steel tubes for use in tubular heat exchangers, surface condensers.
read more
27Oct2020
Lord Fin Tube-Blind disk is flange cover
A blind disk, also known as a blind flange or flange cover, is a type of flange that is used to close or seal the end of a pipe, valve, or vessel. It is essentially a solid disk with holes for bolts.
read more
27Oct2020
Lord Fin Tube-Cold-wound finned tubes
Cold-wound finned tubes are a type of heat exchanger tube that is used to increase the surface area of the tube. The fins on these tubes are wound around the outside of the tube in a helical pattern, using a cold rolling process.
read more
22Oct2020
Lord Fin Tube-Tube Sheet Fabrication
The accuracy of tube sheet fabrication, especially the tube hole spacing and tube diameter tolerance, verticality, and smoothness greatly affect the assembly and use performance of the chemical equipment listed above.
read more
21Oct2020
Lord Fin Tube-Membrane type water wall
The membrane type water wall welds finned tubes (or flat steel and smooth tubes) to each other to form a whole tube panel.high-temperature and high-pressure boilers mostly use membrane water walls.
read more
16Oct2020
Lord Fin Tube-Finned Tube manufacturer
High frequency welding finned tube;L-type and double-l-type finned tube;KLM finned tube;Bimetallic rolling finned tube;Embedded finned tube;Brazed finned tube;Heat pipe;Elliptical winding finned tube;Rectangular elliptical hot-dip galvanized finned tube.
read more
7Oct2020
Lord Fin Tube-High frequency welding of spiral fined tube
High frequency welding spiral Fined tube is one of the most widely used spiral Fined tubes. It is widely used in power, metallurgy, cement industry waste heat recovery and petrochemical industry.
read more
7Oct2020
Lord Fin Tube-Brazing spiral fined tube
What are brazing spiral finned tubes? Brazed spiral finned tubes deliver unmatched thermal performance and structural integrity, making them essential for the most efficient and durable heat transfer systems.
read more
5Oct2020
Lord Fin Tube-Embedded Fined tube
Embedded finned tubes refer to a type of heat exchange component. To enhance heat exchange efficiency, fins are typically integrated onto the surface of the heat exchange tubes. This addition of fins increases the external surface area of the tubes.
read more